Just treated myself to one, if anyone ever needs help!

They are good , ive got one , dosent get used much , but when i need it , its great ....

Butty been looking for a range of drifts, cant seem to find any anywhere! Did you get your own made up?

Made most of mine myself at my old job .......

Thought you were gonna say that! Did you make a recess in them for the driving pin or are thy flat?

What are you pressing out ? bug joints i just press out the joint itself , then i use a die to press the shell out , you`ll struggle to push whole joint out in one hit/go ...Bay ones i gring the back off then knock joint out , and put 2 cuts down the outer shell case , takes about 5 mins , i use the press to fit the joints on busses .....but thats all ...... If your pressing up around the 10/15 tons area you really want to make sure joint and arm are suppoorted very well , ive been to A+E before due to items shooting out of a press and that was 10 tons .......

Sound advice. Was gonna start off with a few bearings, so wanted a few different diameter drifts/dies? Sockets may do the trick to start.

Used it on Saturday! Awesome tool, chuffed to bits.